Back to overview

SwissCord

This model is a low profile lift with a low rope guidance. The re-feeding of the support cord is approximately 4.7 m (110'' in) height above the site. The Sunkid Swisscord is used for different applications such as beginner-lifts, logistical or shuttle services solutions in ski areas.

ATLAS plastic rope with welded rubber grips is used as a haul rope. The devices of the drive and return stations are built into almost closed box, which height can be adjusted mechanically to 4.7 m (110'' in) on a vertical square pole. This enables the simple height adjustment of the tow rope to the current snow conditions on the lift track. The rope can also be lifted, so that the grooming machine can prepare the lift track.

Adaptation to passengers (children or adults)
Adaptation to snow depth
Easy slope preparation by grooming machine (Raising of the rope up to 4,7m – optionally up to 6,7m)
Drive power 5,5 to 11kW (7.5 to 15 PS) depending on length and inclination
ATLAS plastic rope with rubber grips
Max. length 300m (985' ft)
Inclination depending on the application up to 15% - connecting lift up to 20%
variable speed adjustment with switchgear – frequency converter; adjustable speed 0 - 2,0 m/sec (395 ft/min)
Overrun fuse with bellow – safety device for maximum safety and easy operation
Engine either at top or bottom station
Total weight approximately 2000kg
Return station approximately 1700kg
Height in retracted state 6,3m
entrance/exit both sides possible
Entrance is possible directly after rope outlet
motor-driven height adjustment by up to 3,9 m(optionally 5,9m)
Foundations: 3 to 6 m³ per station, depending on the ground and exposure; no tension ropes or fences; rope run is covered.
Assembly approximately 0,5 - 1 day, disassembly approximately 2-3 hours
Permission without own supervising personnel is possible
Theoretical capacity up to 720 Per/h